Best Jigsaw Blades 2026: Clean Cuts in Wood, Metal, and Everything Between

Your jigsaw is only as good as the blade you put in it. Run a dull, wrong-tooth-count blade through plywood and you’ll get splintering, wandering cuts, and a lot of frustration. Swap in the right blade and that same jigsaw suddenly cuts like a surgical instrument. The blade is where the real cutting happens, and getting this right is the cheapest upgrade you can make to your saw.

We’ve tested and researched the top jigsaw blade sets for 2026, covering everything from premium carbide-tipped options to budget-friendly assortment packs that give you a blade for every material in the shop. Whether you’re cutting hardwood, sheet metal, laminate flooring, or scrolling tight curves, this guide has you covered.

Award	Model	Price	Rating	Why We Picked It	Buy
Best Overall	Bosch T30C 30-Piece Set	~$35	4.7/5	Industry-leading blade quality, every blade type you need	View Deal
Best Premium	Diablo DJT20S 20-Piece Set	~$26	4.6/5	Bi-metal blades, up to 5x longer life, Freud engineering	View Deal
Best Mid-Range	DEWALT DW3742C 14-Piece Set	~$18	4.7/5	Rock-solid reliability, HCS and bi-metal mix, with case	View Deal
Best for Metal	LENOX 1994458 10-Piece Kit	~$19	4.5/5	Power Blast technology, precision-ground teeth, industrial pedigree	View Deal
Best Value	WORKPRO 25-Piece Set	~$14	4.5/5	25 blades with HCS/HSS/BIM mix at an unbeatable price	View Deal
Best Budget Set	EZARC 30-Piece Set	~$16	4.5/5	30 blades, 8 blade types, best bang-for-buck assortment	View Deal

Understanding Jigsaw Blades

Before we get into specific products, here’s what you need to know to pick the right blade every time. Getting this wrong means bad cuts and wasted material.

T-Shank vs U-Shank

T-shank blades are the universal standard in 2026. They lock into the saw with a quick-release mechanism — no tools needed to swap blades. U-shank (universal shank) blades are the older design that require a set screw to hold them in place. Unless you’re running a vintage jigsaw from the 1980s, stick with T-shank. Every modern jigsaw from Bosch, DEWALT, Makita, and Milwaukee accepts them, and they provide a more secure grip with less blade deflection.

TPI Explained (Teeth Per Inch)

TPI is the single most important number on any jigsaw blade. It determines cut speed, cut quality, and what materials you can handle:

• 6-10 TPI: Fast, aggressive cuts in wood. Larger teeth remove material quickly but leave a rougher edge. Use for framing, rough carpentry, and dimensional lumber.
• 10-14 TPI: The sweet spot for general woodworking. Clean cuts in plywood, MDF, and softwoods without excessive splintering.
• 14-20 TPI: Fine cuts in thin wood, laminate, and plastics. Also good for scroll cuts and tight curves.
• 20-36 TPI: Metal cutting territory. The fine teeth prevent snagging on sheet metal, copper pipe, and aluminum.

The rule is simple: more teeth = smoother but slower. Fewer teeth = faster but rougher.

Blade Materials

• HCS (High Carbon Steel): The standard for wood cutting. Flexible, inexpensive, and cuts clean in softwood, plywood, and particle board. Dulls faster than other materials.
• HSS (High Speed Steel): Harder than HCS. Handles non-ferrous metals and hardwoods but is more brittle. Less flex, which means straighter cuts in dense material.
• BIM (Bi-Metal): An HSS cutting edge welded to an HCS body. Best of both worlds — the flexibility to absorb vibration plus the hardness to stay sharp. Lasts up to 10x longer than HCS alone. The go-to for metal cutting and nail-embedded wood.
• Carbide: The premium option. Carbide-tipped or carbide-grit blades handle tile, cement board, fiberglass, and hardened steel. Expensive but essentially unbreakable in normal use.

Tooth Patterns

• Milled teeth: Side-set teeth that cut aggressively. Best for fast, rough cuts in thick wood.
• Ground teeth: Precision-sharpened for smooth cuts. Used in clean-cutting and laminate blades where finish quality matters.
• Wavy-set teeth: Teeth alternating in a wave pattern. Designed for thin sheet metal and tubing where individual set teeth would snag.
• Reverse teeth: Teeth point downward on the upstroke. Eliminates top-surface splintering on laminate and veneered panels.

Our Top Picks

Bosch T30C 30-Piece Set — Best Overall

Price: ~$35 | Rating: 4.7/5

Check Price on Amazon

Bosch invented the T-shank system and they’re still the benchmark for jigsaw blades. The T30C set gives you 30 blades across 8 blade types, covering fast wood cutting, clean wood cutting, scrolling, and metal work. Every blade in this set uses Bosch’s proprietary tooth geometry that delivers noticeably cleaner cuts than generic alternatives — you can feel the difference on the first plunge cut.

The set includes standout performers like the T101BF clean-cut hardwood blade with ground teeth, the T308B extra-clean blade for visible cuts, and the T119BO scroll blade that handles 1-inch radius curves without binding. The included heavy-duty case has labeled slots for each blade type, which matters when you’re on a job site and need the right blade fast. If you’re looking for a jigsaw to pair these with, check out our best cordless jigsaws guide.

The only real knock is that this set skips carbide blades entirely — if you need to cut tile or cement board, you’ll need to buy those separately. But for 95% of jigsaw work, this set has you covered.

Spec	Value
Blade Count	30 pieces
Blade Types	8 (T119BO, T144D, T101B, T101D, T101BF, T118A, T118B, T308B)
Shank	T-shank (universal)
Materials	HCS, HSS, BIM
TPI Range	6-24 TPI
Blade Lengths	3-1/4″ to 5-1/4″
Storage Case	Yes — heavy-duty reusable

Bottom Line: The Bosch T30C is the jigsaw blade set to beat. Bosch’s engineering pedigree shows in every cut, and 30 blades means you won’t be running to the hardware store mid-project. Best overall for anyone serious about jigsaw work.

---

Diablo DJT20S 20-Piece Set — Best Premium

Price: ~$26 | Rating: 4.6/5

Check Price on Amazon

Diablo (made by Freud) has earned a reputation for blades that outlast the competition, and the DJT20S proves it. These bi-metal blades feature an ultra-hardened cutting edge that Diablo claims delivers up to 5x longer blade life compared to standard blades. In practice, the difference is real — these blades hold their edge noticeably longer when cutting hardwoods and plywood, which means fewer blade changes and more consistent cut quality throughout a project.

The 20-piece assortment covers clean wood cutting, fast wood cutting, scroll cuts, and metal work. The optimized body design reduces vibration, which translates to less blade wander and straighter cuts. Where Diablo really shines is in nail-embedded wood — the bi-metal construction handles hidden nails without snapping, which is a lifesaver during renovation work. The blades also work exceptionally well in both cordless and corded jigsaws.

At around $26 for 20 blades, Diablo offers premium performance at a surprisingly reasonable price per blade. The included case isn’t as robust as Bosch’s, but the blade quality more than makes up for it.

Spec	Value
Blade Count	20 pieces
Blade Types	Wood clean, wood fast, scroll, metal
Shank	T-shank (universal)
Materials	HCS, HSS, BIM
TPI Range	6-24 TPI
Blade Lengths	3″ to 4″
Storage Case	Yes — plastic case

Bottom Line: Diablo’s DJT20S is for anyone who values blade longevity and cut quality over sheer quantity. Freud’s metallurgy expertise shows in every blade. If you do renovation work with nail-embedded lumber, these are the blades to own.

---

DEWALT DW3742C 14-Piece Set — Best Mid-Range

Price: ~$18 | Rating: 4.7/5

Check Price on Amazon

DEWALT’s DW3742C has been a jobsite staple for years, and the 2026 version continues that legacy. This 14-piece set packs in 7 blade types (2 of each) covering fast wood cutting, clean wood cutting, down-cutting for laminate, and metal work. The HCS blades are thick and rigid, producing straighter cuts than most competitors in this price range. The bi-metal blades handle sheet metal and copper pipe without complaint.

What sets the DEWALT apart is the clear, labeled storage case that snaps shut securely — a small detail that matters a lot when this set lives in a rolling tool bag. The blades also feel a step above generic options: thicker stock, cleaner tooth geometry, and consistent quality blade-to-blade. DEWALT backs these with an extended three-year warranty, which is rare for consumable accessories. For more on DEWALT quality, see our Milwaukee vs DEWALT brand comparison.

The only limitation is the 14-blade count — power users will burn through these faster than the 30-piece Bosch set. But if you want pro-grade reliability without the premium price, the DW3742C delivers.

Spec	Value
Blade Count	14 pieces (2 each of 7 types)
Blade Types	Fast wood, clean wood, down-cut laminate, metal
Shank	T-shank (universal)
Materials	HCS, BIM
TPI Range	6-32 TPI
Blade Lengths	3″ to 4″
Storage Case	Yes — clear durable case

Bottom Line: The DW3742C is the reliable mid-range pick. DEWALT’s build quality and warranty make this set punch above its weight. Ideal for DIYers who want quality blades without overpaying for a huge set.

---

LENOX 1994458 10-Piece Kit — Best for Metal

Price: ~$19 | Rating: 4.5/5

Check Price on Amazon

LENOX has been making industrial-grade cutting tools for over a century, and their jigsaw blades reflect that pedigree. The 1994458 kit is built around LENOX’s Power Blast Technology — a heat-treatment process that strengthens the blade body to reduce breaks during heavy cutting. If you regularly cut metal conduit, sheet metal, or steel studs with your jigsaw, this is the set to buy.

The precision-ground teeth with optimized tooth angles deliver noticeably smoother finishes in metal compared to standard bi-metal blades. The kit includes blades for both thick and thin metal applications (14 TPI and 24 TPI), plus general-purpose wood blades so you’re not stuck buying two separate sets. LENOX’s patented T2 Technology extends blade life by reducing heat buildup at the tooth tips — the number one cause of premature blade failure in metal cutting.

The hard case is compact and well-organized. The 10-blade count is modest, but LENOX designed these to last longer per blade than most competitors. If your work involves HVAC ductwork, plumbing, or electrical conduit, these blades pay for themselves quickly.

Spec	Value
Blade Count	10 pieces
Blade Types	5 types: wood (6, 10 TPI), metal (14, 20, 24 TPI)
Shank	T-shank (universal)
Materials	BIM with Power Blast treatment
TPI Range	6-24 TPI
Blade Lengths	3-1/2″ to 4″
Storage Case	Yes — hard case

Bottom Line: LENOX brings industrial metal-cutting expertise to the consumer market. If your jigsaw sees more metal than wood, the 1994458 is purpose-built for your workload. Best metal-cutting blades in this roundup, period.

---

WORKPRO 25-Piece Set — Best Value

Price: ~$14 | Rating: 4.5/5

Check Price on Amazon

At roughly $0.56 per blade, the WORKPRO 25-piece set is almost absurdly good value. You get 25 T-shank blades across 7 different types, including HCS blades for wood, HSS blades for hardwoods and reinforced plastics, and BIM blades for metal and nail-embedded wood. That’s the same material variety you’d find in sets costing 2-3x more. The T-shank fitment works flawlessly with Bosch, DEWALT, Makita, and every other major jigsaw brand.

Don’t let the price fool you — these aren’t junk blades. The T101B clean wood blades produce respectable cuts in plywood, and the T118A metal blades handle thin sheet metal and aluminum without issues. The T101AO scroll blades are thin enough for reasonably tight curves. Are they as refined as Bosch or Diablo? No. But for the price of a fast-food lunch, you get a complete blade arsenal that handles 90% of DIY jigsaw work.

The storage case is basic but functional. WORKPRO includes five each of the most-used blade types (T118A, T144D, T101B), which means you’ve got spares for the blades you’ll burn through fastest. For DIYers who don’t want to stress about ruining an expensive blade, this set lets you cut with confidence.

Spec	Value
Blade Count	25 pieces
Blade Types	7 (T118A, T144D, T101B, T123X, T101AO, T127D, T345XF)
Shank	T-shank (universal)
Materials	HCS, HSS, BIM
TPI Range	6-20 TPI
Blade Lengths	2-15/16″ to 5-1/4″
Storage Case	Yes — plastic case

Bottom Line: The WORKPRO 25-piece set is the best value pick for DIYers who need a complete blade assortment without the premium price tag. You won’t win any cutting competitions, but you’ll have a blade for every job in the shop.

---

EZARC 30-Piece Set — Best Budget Set

Price: ~$16 | Rating: 4.5/5

Check Price on Amazon

EZARC has quietly become one of the best values in power tool accessories, and their 30-piece jigsaw blade set proves it. For around $16 you get 30 blades across 8 different types — that’s more blade variety than the Bosch T30C at less than half the price. The set covers every common cutting scenario: clean wood (T101B), fast wood (T144D), reverse-tooth for laminate (T101BR), curve cutting (T101AO, T119BO), and metal (T118A, T118B).

The standout here is the T101BR reverse-tooth blade, which many budget sets skip entirely. If you cut laminate flooring or veneered plywood, the downward-cutting teeth eliminate the splintering that standard blades cause on the top surface. The T111C blade is another nice inclusion — its 8 TPI provides a good middle ground between speed and finish quality in solid wood. For more information on matching blades to materials, see our best saw blades guide.

Are these blades going to last as long as Diablo or Bosch? No. But at $0.53 per blade, you can afford to swap them out more frequently. For weekend warriors, home renovation projects, and anyone building up their first blade collection, EZARC offers the most blade variety per dollar you can buy.

Spec	Value
Blade Count	30 pieces
Blade Types	8 (T101B, T101BR, T144D, T111C, T101AO, T119BO, T118A, T118B)
Shank	T-shank (universal)
Materials	HCS, CrV, HSS
TPI Range	6-20 TPI
Blade Lengths	2-15/16″ to 4″
Storage Case	Yes — labeled storage case

Bottom Line: EZARC delivers 30 blades with 8 types for the price of a pizza. It’s the best budget entry point for anyone building a jigsaw blade collection from scratch. Keep spares in the truck, the shop, and the toolbox.

---

Full Specs Comparison

Model	Blade Count	Materials	Blade Types	TPI Range	Case	Price
Bosch T30C	30	HCS, HSS, BIM	8	6-24	Heavy-duty	~$35
Diablo DJT20S	20	HCS, HSS, BIM	Wood, scroll, metal	6-24	Plastic	~$26
DEWALT DW3742C	14	HCS, BIM	7	6-32	Clear durable	~$18
LENOX 1994458	10	BIM (Power Blast)	5	6-24	Hard case	~$19
WORKPRO 25-Piece	25	HCS, HSS, BIM	7	6-20	Plastic	~$14
EZARC 30-Piece	30	HCS, CrV, HSS	8	6-20	Labeled	~$16

Prices are approximate as of February 2026 and may vary.

Matching Blades to Materials

Picking the wrong blade for the material is the most common jigsaw mistake. Here’s the cheat sheet:

Softwood and Plywood (Pine, Spruce, MDF)

Use a 6-10 TPI HCS blade (T144D type) for fast rough cuts, or a 10 TPI clean-cut blade (T101B) for finish work. For plywood where you need zero top-surface splintering, use a reverse-tooth blade (T101BR) that cuts on the downstroke.

Hardwood (Oak, Maple, Walnut)

Use a 10 TPI ground-tooth blade (T101BF type) or bi-metal blade. The harder the wood, the more you benefit from HSS or BIM construction. Reduce your saw’s orbital action to minimize blade wander in dense grain.

Laminate Flooring

This is where reverse-tooth blades earn their keep. Use a 10-12 TPI down-cutting blade to prevent chipping the laminate surface. Alternatively, cut face-down with a standard blade — though reverse-tooth is more practical when marking cut lines on the face side.

Sheet Metal and Thin Metal

Use a 20-36 TPI bi-metal blade (T118A or T118B). The fine teeth prevent the blade from snagging on thin material. Always maintain at least 3 teeth in contact with the metal at all times — if the material is too thin, sandwich it between plywood to prevent tearing. For thicker metal conduit, a 14 TPI bi-metal blade works better.

Tile, Cement Board, and Fiberglass

Standard tooth blades won’t cut these materials. You need a carbide-grit blade with no teeth at all — just an abrasive edge that grinds through hard materials. These are specialty blades sold individually (not included in most assortment sets). If you need blades for multi-material work including tough substrates, check our oscillating multi-tool blades guide for alternatives.

Curves and Scrollwork

Use a narrow scroll blade (T101AO or T119BO) with a thin body and 18-20 TPI. The narrow profile allows tighter turning radii without binding. For curves tighter than 1 inch, you’ll want the thinnest scroll blade available. Reduce speed and orbital action for maximum control.