On the drill side, the XFD17 replaces a model that has been a default recommendation for years. Our best cordless drills guide is the place to compare it against DeWalt, Milwaukee, and Ryobi equivalents once street pricing settles.
Makita LXT users already have the batteries, so a bare tool at $129 is a cheap way to refresh a tired drill.
When and Where
All three are preorder at Acme Tools right now. Makita has not published a ship date, so check the manufacturer page before you plan around it.
Amazon does not have these listed yet as of this writing. When it does, we will add the ASINs and current pricing to the database and link them here.
Sources: SlashGear, Tool Nut XFD17Z listing, Tool Nut XWT20Z listing.
Against Makita’s own catalog, the XWT20 slots underneath the XWT19Z and the mid-torque XWT18Z. That is a deliberate gap fill: the old compact options were mostly 3/8-inch or light-duty, and the mid-torque wrenches are heavier than most people want to hold over their head.
If you want more headroom on lug nuts, a mid-torque model like the Ryobi PBLIW25B at 650 ft-lbs is a different class of tool. For a fairer read on where compact 1/2-inch wrenches land, our Greenworks IW5370 breakdown covers the low-torque end of the market.
On the drill side, the XFD17 replaces a model that has been a default recommendation for years. Our best cordless drills guide is the place to compare it against DeWalt, Milwaukee, and Ryobi equivalents once street pricing settles.
Makita LXT users already have the batteries, so a bare tool at $129 is a cheap way to refresh a tired drill.
When and Where
All three are preorder at Acme Tools right now. Makita has not published a ship date, so check the manufacturer page before you plan around it.
Amazon does not have these listed yet as of this writing. When it does, we will add the ASINs and current pricing to the database and link them here.
Sources: SlashGear, Tool Nut XFD17Z listing, Tool Nut XWT20Z listing.
The XWT20 is the more interesting release. It is 5-1/8 inches long and 3.2 pounds with a 3.0Ah battery, which is short enough to get between a tire and a fender liner without an extension.
Makita’s own published fastening torque is 180 ft-lbs, with 300 ft-lbs of nut-busting on tap. It also carries XPT, Makita’s dust and water protection, plus an LED with pre-glow so the light is already on before you pull the trigger.
How It Stacks Up
Against Makita’s own catalog, the XWT20 slots underneath the XWT19Z and the mid-torque XWT18Z. That is a deliberate gap fill: the old compact options were mostly 3/8-inch or light-duty, and the mid-torque wrenches are heavier than most people want to hold over their head.
If you want more headroom on lug nuts, a mid-torque model like the Ryobi PBLIW25B at 650 ft-lbs is a different class of tool. For a fairer read on where compact 1/2-inch wrenches land, our Greenworks IW5370 breakdown covers the low-torque end of the market.
On the drill side, the XFD17 replaces a model that has been a default recommendation for years. Our best cordless drills guide is the place to compare it against DeWalt, Milwaukee, and Ryobi equivalents once street pricing settles.
Makita LXT users already have the batteries, so a bare tool at $129 is a cheap way to refresh a tired drill.
When and Where
All three are preorder at Acme Tools right now. Makita has not published a ship date, so check the manufacturer page before you plan around it.
Amazon does not have these listed yet as of this writing. When it does, we will add the ASINs and current pricing to the database and link them here.
Sources: SlashGear, Tool Nut XFD17Z listing, Tool Nut XWT20Z listing.
The two drills are the same tool with one difference: the XPH17 adds hammer mode for masonry.
Both run a 20-position clutch, a two-speed transmission, a 1/2-inch keyless chuck, and 1-1/2-inch drilling capacity in wood. If you already own a rotary hammer, save the $10 and buy the XFD17. If brick and block are part of your week, the XPH17 pays for itself.
The XWT20 is the more interesting release. It is 5-1/8 inches long and 3.2 pounds with a 3.0Ah battery, which is short enough to get between a tire and a fender liner without an extension.
Makita’s own published fastening torque is 180 ft-lbs, with 300 ft-lbs of nut-busting on tap. It also carries XPT, Makita’s dust and water protection, plus an LED with pre-glow so the light is already on before you pull the trigger.
How It Stacks Up
Against Makita’s own catalog, the XWT20 slots underneath the XWT19Z and the mid-torque XWT18Z. That is a deliberate gap fill: the old compact options were mostly 3/8-inch or light-duty, and the mid-torque wrenches are heavier than most people want to hold over their head.
If you want more headroom on lug nuts, a mid-torque model like the Ryobi PBLIW25B at 650 ft-lbs is a different class of tool. For a fairer read on where compact 1/2-inch wrenches land, our Greenworks IW5370 breakdown covers the low-torque end of the market.
On the drill side, the XFD17 replaces a model that has been a default recommendation for years. Our best cordless drills guide is the place to compare it against DeWalt, Milwaukee, and Ryobi equivalents once street pricing settles.
Makita LXT users already have the batteries, so a bare tool at $129 is a cheap way to refresh a tired drill.
When and Where
All three are preorder at Acme Tools right now. Makita has not published a ship date, so check the manufacturer page before you plan around it.
Amazon does not have these listed yet as of this writing. When it does, we will add the ASINs and current pricing to the database and link them here.
Sources: SlashGear, Tool Nut XFD17Z listing, Tool Nut XWT20Z listing.
Makita has not posted retail pricing or a ship date on its own site yet. Retailers moved first.
Acme Tools has the XFD17Z bare tool at $129, the XPH17Z at $139, and the XWT20Z at $169, all listed as preorder. Treat those as preorder numbers, not settled street prices.
The Specs
| Model | What It Is | Torque | Speed | Size / Weight | Bare Price |
|---|---|---|---|---|---|
| XFD17Z | 1/2″ driver-drill | 580 in-lbs | 0-500 / 0-1,900 RPM | 6-9/16″ long, 3.7 lb with 3.0Ah | $129 |
| XPH17Z | 1/2″ hammer driver-drill | 580 in-lbs | 0-500 / 0-1,900 RPM, 28,500 BPM | 6-9/16″ long, 3.7 lb with 3.0Ah | $139 |
| XWT20Z | Compact 1/2″ impact wrench | 300 ft-lbs nut-busting | 0-2,300 RPM, 0-3,200 IPM | 5-1/8″ long, 3.2 lb with 3.0Ah | $169 |
The two drills are the same tool with one difference: the XPH17 adds hammer mode for masonry.
Both run a 20-position clutch, a two-speed transmission, a 1/2-inch keyless chuck, and 1-1/2-inch drilling capacity in wood. If you already own a rotary hammer, save the $10 and buy the XFD17. If brick and block are part of your week, the XPH17 pays for itself.
The XWT20 is the more interesting release. It is 5-1/8 inches long and 3.2 pounds with a 3.0Ah battery, which is short enough to get between a tire and a fender liner without an extension.
Makita’s own published fastening torque is 180 ft-lbs, with 300 ft-lbs of nut-busting on tap. It also carries XPT, Makita’s dust and water protection, plus an LED with pre-glow so the light is already on before you pull the trigger.
How It Stacks Up
Against Makita’s own catalog, the XWT20 slots underneath the XWT19Z and the mid-torque XWT18Z. That is a deliberate gap fill: the old compact options were mostly 3/8-inch or light-duty, and the mid-torque wrenches are heavier than most people want to hold over their head.
If you want more headroom on lug nuts, a mid-torque model like the Ryobi PBLIW25B at 650 ft-lbs is a different class of tool. For a fairer read on where compact 1/2-inch wrenches land, our Greenworks IW5370 breakdown covers the low-torque end of the market.
On the drill side, the XFD17 replaces a model that has been a default recommendation for years. Our best cordless drills guide is the place to compare it against DeWalt, Milwaukee, and Ryobi equivalents once street pricing settles.
Makita LXT users already have the batteries, so a bare tool at $129 is a cheap way to refresh a tired drill.
When and Where
All three are preorder at Acme Tools right now. Makita has not published a ship date, so check the manufacturer page before you plan around it.
Amazon does not have these listed yet as of this writing. When it does, we will add the ASINs and current pricing to the database and link them here.
Sources: SlashGear, Tool Nut XFD17Z listing, Tool Nut XWT20Z listing.
Makita quietly added three tools to its 18V LXT line this week: the XFD17 1/2-inch driver-drill, the XPH17 hammer driver-drill, and the XWT20 compact 1/2-inch impact wrench.
None of them are headline-grabbing flagship tools. That is the point.
These are the compact workhorses that ride in the truck every day, and Makita just replaced three of its most familiar models with brushless updates.
Makita has not posted retail pricing or a ship date on its own site yet. Retailers moved first.
Acme Tools has the XFD17Z bare tool at $129, the XPH17Z at $139, and the XWT20Z at $169, all listed as preorder. Treat those as preorder numbers, not settled street prices.
The Specs
| Model | What It Is | Torque | Speed | Size / Weight | Bare Price |
|---|---|---|---|---|---|
| XFD17Z | 1/2″ driver-drill | 580 in-lbs | 0-500 / 0-1,900 RPM | 6-9/16″ long, 3.7 lb with 3.0Ah | $129 |
| XPH17Z | 1/2″ hammer driver-drill | 580 in-lbs | 0-500 / 0-1,900 RPM, 28,500 BPM | 6-9/16″ long, 3.7 lb with 3.0Ah | $139 |
| XWT20Z | Compact 1/2″ impact wrench | 300 ft-lbs nut-busting | 0-2,300 RPM, 0-3,200 IPM | 5-1/8″ long, 3.2 lb with 3.0Ah | $169 |
The two drills are the same tool with one difference: the XPH17 adds hammer mode for masonry.
Both run a 20-position clutch, a two-speed transmission, a 1/2-inch keyless chuck, and 1-1/2-inch drilling capacity in wood. If you already own a rotary hammer, save the $10 and buy the XFD17. If brick and block are part of your week, the XPH17 pays for itself.
The XWT20 is the more interesting release. It is 5-1/8 inches long and 3.2 pounds with a 3.0Ah battery, which is short enough to get between a tire and a fender liner without an extension.
Makita’s own published fastening torque is 180 ft-lbs, with 300 ft-lbs of nut-busting on tap. It also carries XPT, Makita’s dust and water protection, plus an LED with pre-glow so the light is already on before you pull the trigger.
How It Stacks Up
Against Makita’s own catalog, the XWT20 slots underneath the XWT19Z and the mid-torque XWT18Z. That is a deliberate gap fill: the old compact options were mostly 3/8-inch or light-duty, and the mid-torque wrenches are heavier than most people want to hold over their head.
If you want more headroom on lug nuts, a mid-torque model like the Ryobi PBLIW25B at 650 ft-lbs is a different class of tool. For a fairer read on where compact 1/2-inch wrenches land, our Greenworks IW5370 breakdown covers the low-torque end of the market.
On the drill side, the XFD17 replaces a model that has been a default recommendation for years. Our best cordless drills guide is the place to compare it against DeWalt, Milwaukee, and Ryobi equivalents once street pricing settles.
Makita LXT users already have the batteries, so a bare tool at $129 is a cheap way to refresh a tired drill.
When and Where
All three are preorder at Acme Tools right now. Makita has not published a ship date, so check the manufacturer page before you plan around it.
Amazon does not have these listed yet as of this writing. When it does, we will add the ASINs and current pricing to the database and link them here.
Sources: SlashGear, Tool Nut XFD17Z listing, Tool Nut XWT20Z listing.
Makita quietly added three tools to its 18V LXT line this week: the XFD17 1/2-inch driver-drill, the XPH17 hammer driver-drill, and the XWT20 compact 1/2-inch impact wrench.
None of them are headline-grabbing flagship tools. That is the point.
These are the compact workhorses that ride in the truck every day, and Makita just replaced three of its most familiar models with brushless updates.
Makita has not posted retail pricing or a ship date on its own site yet. Retailers moved first.
Acme Tools has the XFD17Z bare tool at $129, the XPH17Z at $139, and the XWT20Z at $169, all listed as preorder. Treat those as preorder numbers, not settled street prices.
The Specs
| Model | What It Is | Torque | Speed | Size / Weight | Bare Price |
|---|---|---|---|---|---|
| XFD17Z | 1/2″ driver-drill | 580 in-lbs | 0-500 / 0-1,900 RPM | 6-9/16″ long, 3.7 lb with 3.0Ah | $129 |
| XPH17Z | 1/2″ hammer driver-drill | 580 in-lbs | 0-500 / 0-1,900 RPM, 28,500 BPM | 6-9/16″ long, 3.7 lb with 3.0Ah | $139 |
| XWT20Z | Compact 1/2″ impact wrench | 300 ft-lbs nut-busting | 0-2,300 RPM, 0-3,200 IPM | 5-1/8″ long, 3.2 lb with 3.0Ah | $169 |
The two drills are the same tool with one difference: the XPH17 adds hammer mode for masonry.
Both run a 20-position clutch, a two-speed transmission, a 1/2-inch keyless chuck, and 1-1/2-inch drilling capacity in wood. If you already own a rotary hammer, save the $10 and buy the XFD17. If brick and block are part of your week, the XPH17 pays for itself.
The XWT20 is the more interesting release. It is 5-1/8 inches long and 3.2 pounds with a 3.0Ah battery, which is short enough to get between a tire and a fender liner without an extension.
Makita’s own published fastening torque is 180 ft-lbs, with 300 ft-lbs of nut-busting on tap. It also carries XPT, Makita’s dust and water protection, plus an LED with pre-glow so the light is already on before you pull the trigger.
How It Stacks Up
Against Makita’s own catalog, the XWT20 slots underneath the XWT19Z and the mid-torque XWT18Z. That is a deliberate gap fill: the old compact options were mostly 3/8-inch or light-duty, and the mid-torque wrenches are heavier than most people want to hold over their head.
If you want more headroom on lug nuts, a mid-torque model like the Ryobi PBLIW25B at 650 ft-lbs is a different class of tool. For a fairer read on where compact 1/2-inch wrenches land, our Greenworks IW5370 breakdown covers the low-torque end of the market.
On the drill side, the XFD17 replaces a model that has been a default recommendation for years. Our best cordless drills guide is the place to compare it against DeWalt, Milwaukee, and Ryobi equivalents once street pricing settles.
Makita LXT users already have the batteries, so a bare tool at $129 is a cheap way to refresh a tired drill.
When and Where
All three are preorder at Acme Tools right now. Makita has not published a ship date, so check the manufacturer page before you plan around it.
Amazon does not have these listed yet as of this writing. When it does, we will add the ASINs and current pricing to the database and link them here.
Sources: SlashGear, Tool Nut XFD17Z listing, Tool Nut XWT20Z listing.
Makita quietly added three tools to its 18V LXT line this week: the XFD17 1/2-inch driver-drill, the XPH17 hammer driver-drill, and the XWT20 compact 1/2-inch impact wrench.
None of them are headline-grabbing flagship tools. That is the point.
These are the compact workhorses that ride in the truck every day, and Makita just replaced three of its most familiar models with brushless updates.
Makita has not posted retail pricing or a ship date on its own site yet. Retailers moved first.
Acme Tools has the XFD17Z bare tool at $129, the XPH17Z at $139, and the XWT20Z at $169, all listed as preorder. Treat those as preorder numbers, not settled street prices.
The Specs
| Model | What It Is | Torque | Speed | Size / Weight | Bare Price |
|---|---|---|---|---|---|
| XFD17Z | 1/2″ driver-drill | 580 in-lbs | 0-500 / 0-1,900 RPM | 6-9/16″ long, 3.7 lb with 3.0Ah | $129 |
| XPH17Z | 1/2″ hammer driver-drill | 580 in-lbs | 0-500 / 0-1,900 RPM, 28,500 BPM | 6-9/16″ long, 3.7 lb with 3.0Ah | $139 |
| XWT20Z | Compact 1/2″ impact wrench | 300 ft-lbs nut-busting | 0-2,300 RPM, 0-3,200 IPM | 5-1/8″ long, 3.2 lb with 3.0Ah | $169 |
The two drills are the same tool with one difference: the XPH17 adds hammer mode for masonry.
Both run a 20-position clutch, a two-speed transmission, a 1/2-inch keyless chuck, and 1-1/2-inch drilling capacity in wood. If you already own a rotary hammer, save the $10 and buy the XFD17. If brick and block are part of your week, the XPH17 pays for itself.
The XWT20 is the more interesting release. It is 5-1/8 inches long and 3.2 pounds with a 3.0Ah battery, which is short enough to get between a tire and a fender liner without an extension.
Makita’s own published fastening torque is 180 ft-lbs, with 300 ft-lbs of nut-busting on tap. It also carries XPT, Makita’s dust and water protection, plus an LED with pre-glow so the light is already on before you pull the trigger.
How It Stacks Up
Against Makita’s own catalog, the XWT20 slots underneath the XWT19Z and the mid-torque XWT18Z. That is a deliberate gap fill: the old compact options were mostly 3/8-inch or light-duty, and the mid-torque wrenches are heavier than most people want to hold over their head.
If you want more headroom on lug nuts, a mid-torque model like the Ryobi PBLIW25B at 650 ft-lbs is a different class of tool. For a fairer read on where compact 1/2-inch wrenches land, our Greenworks IW5370 breakdown covers the low-torque end of the market.
On the drill side, the XFD17 replaces a model that has been a default recommendation for years. Our best cordless drills guide is the place to compare it against DeWalt, Milwaukee, and Ryobi equivalents once street pricing settles.
Makita LXT users already have the batteries, so a bare tool at $129 is a cheap way to refresh a tired drill.
When and Where
All three are preorder at Acme Tools right now. Makita has not published a ship date, so check the manufacturer page before you plan around it.
Amazon does not have these listed yet as of this writing. When it does, we will add the ASINs and current pricing to the database and link them here.
Sources: SlashGear, Tool Nut XFD17Z listing, Tool Nut XWT20Z listing.