Pumping a manual floor jack 20 times to get a car in the air is fine once. When you’re doing it every weekend, it gets old fast. Battery-powered electric floor jacks lift a car with a button press, lower it the same way, and cost less effort than the old-fashioned method. This guide covers the best electric floor jacks for 2026, from sub-$130 emergency units to $500 full-garage models, with the trade-offs laid out clearly so you buy the right type for your situation.
Two product types are covered here. Electric floor jacks (ROADTEK-type) are proper trolley-style jacks with a built-in 20V lithium battery, designed for sustained garage work. Cordless car jacks (STANDTALL, Greenworks-type) are scissor-style units for emergency tire changes and light garage use. They look similar but serve different purposes. The buying guide section explains how to tell them apart and which fits your needs.
Best Electric Floor Jacks 2026: Quick-Pick Table
| Award | Model | Price | Why We Picked It | Buy |
|---|---|---|---|---|
| Best Overall | ROADTEK 3 Ton Aluminum & Steel Electric Floor Jack | $399.99 | Real trolley-style floor jack, built-in 20V battery, 3-3/4″ to 20″ lift range | Buy Now |
| Best Value Cordless | STANDTALL 5 Ton Cordless (DeWalt 20V MAX compatible) | $106.99 | Works with DeWalt 20V MAX batteries, 5-ton rating, wireless remote included | Buy Now |
| Best for Greenworks Users | Greenworks 24V Cordless Car Jack Kit | $109.49 | Fits 24V PowerAll battery platform, 3-ton, self-locking protection | Buy Now |
| Best Complete Kit | STANDTALL 5 Ton 12V Electric Kit | $128.60 | 12V floor jack plus impact wrench and inflator in one carry case | Buy Now |
| Best for Low-Profile Cars | ROADTEK 3 Ton Standard Electric Floor Jack | $489.99 | 3-3/8″ minimum clearance for lowered vehicles, 24.25″ max lift height | Buy Now |
Prices reflect Amazon pricing at time of writing. Check current price before buying.
How Electric Floor Jacks Work (vs. Hydraulic)
A traditional hydraulic floor jack builds pressure by hand: you pump the handle up and down until the jack saddle contacts the vehicle, then keep pumping until it’s at height. An electric floor jack replaces that pump stroke with a battery-powered DC motor. Press the up button, the motor drives the pump, and the jack rises. Press the down button, a release valve controls the descent.
The scissor-style cordless floor jacks in this guide work differently: they use an electric motor to spin a screw mechanism that extends the scissor arms outward and up. They’re lighter and cheaper than trolley jacks but have less side-to-side stability under load. For sustained brake or suspension work, a trolley-style electric floor jack is the safer setup. For tire changes and roadside emergencies, a cordless scissor jack covers the job at a fraction of the cost. Our jack type comparison covers the full trade-off breakdown.
Electric Floor Jack Reviews
ROADTEK 3 Ton Aluminum & Steel Electric Floor Jack — Best Overall
Price: $399.99 | Buy Now on Amazon
The ROADTEK aluminum-steel model is the best electric floor jack for home garage use if you want real trolley-jack geometry with battery-powered operation. The built-in 20V lithium battery drives an industrial-grade DC motor and piston pump. You press the button, it lifts. The aluminum-and-steel body keeps weight down compared to all-steel models while maintaining a 3-ton (6,000-lb) capacity, which covers most sedans, crossovers, SUVs, and light trucks.
Lift range runs from 3-3/4″ to 20″, which handles most vehicles at factory ride height. The gradual release valve controls descent speed so the car comes down smoothly. The low-profile design at 3-3/4″ saddle height fits under most stock vehicles without needing ramps. If you need slightly lower entry point for lowered suspension, see the standard model below.
Pros
- Proper floor jack geometry, stable under sustained loads
- One-button lift and controlled gradual descent
- Aluminum-steel build is lighter than all-steel without sacrificing capacity
- 3-3/4″ saddle clears most factory ride heights
Cons
- $400 is a real buy — hard to justify for occasional use
- Heavier to move than scissor-type options
- 20″ max height won’t cover full suspension travel on lifted trucks
| Spec | Value |
|---|---|
| Capacity | 3 ton (6,000 lbs) |
| Lift Height | 3-3/4″ to 20″ |
| Power | Built-in 20V lithium battery |
| Construction | Aluminum and steel |
| Type | Electric trolley floor jack |
Bottom line: Buy this if you do regular garage work and want a real floor jack that operates on a button press instead of a pump handle.
STANDTALL 5 Ton Cordless Electric Floor Jack — Best Value Cordless
Price: $106.99 | Buy Now on Amazon
The STANDTALL 5 Ton cordless floor jack includes an 18V battery and works with DeWalt 20V MAX batteries, making it the pick if you’re already on a 20V MAX tool platform and want to share batteries across tools. The 5-ton rated capacity covers trucks, full-size SUVs, and vans — more headroom than most buyers need, but useful if you own a heavier vehicle. A 328-foot wireless remote means you can operate the lift without crouching under the vehicle.
This is a scissor-type cordless jack, not a trolley floor jack. It’s best for tire changes and quick lifts rather than sustained brake or suspension work. For regular garage work on jack stands, the ROADTEK above is the right choice. For roadside emergencies or quick one-corner tire swaps, this unit at $107 is a strong value.
Pros
- Works with DeWalt 20V MAX batteries (18V compatible)
- 5-ton rating handles trucks and large SUVs
- 328-ft wireless remote, no crouching required
- Under $110, strong value for a battery-powered unit
Cons
- Scissor type: not suitable for sustained brake or suspension work
- Verify 20V MAX compatibility with your specific battery model before relying on it
- Lift height range not published by manufacturer (check listing)
| Spec | Value |
|---|---|
| Capacity | 5 ton (10,000 lbs) |
| Power | 18V battery included (DeWalt 20V MAX compatible) |
| Remote | 328 ft wireless |
| Type | Cordless scissor jack |
| Construction | Heavy-duty steel |
Bottom line: Best value if you want a battery-powered cordless floor jack for tire changes and want the option to use your DeWalt 20V MAX batteries.
Greenworks 24V Cordless Car Jack Kit, 3 Ton — Best for Greenworks Users
Price: $109.49 | Buy Now on Amazon
If you’re already in the Greenworks 24V PowerAll ecosystem, the car jack runs on the same batteries as your string trimmer, chainsaw, and leaf blower. The PowerAll family covers more than 125 tools, which makes battery sharing realistic for a weekend garage user. Lift height runs from 6-1/8″ to 17-1/2″, which fits most vehicles at stock height. The self-locking function holds position under load even if the motor cuts out — a safety feature worth having on any electric lifting device.
The 3-ton capacity covers sedans, minivans, and smaller crossovers well. For full-size trucks or heavy SUVs over 6,000 lbs, look at the 5-ton STANDTALL options above. For compact and mid-size vehicle owners already on the Greenworks platform, this jack makes sense as a battery-sharing add-on rather than buying a separate charger and battery system.
Pros
- Shares batteries with 125+ Greenworks 24V tools
- Self-locking and overload protection built in
- One-button operation, 6-1/8″ min saddle
- Comparable price to competing 12V units
Cons
- 3-ton capacity — not ideal for full-size trucks or heavy SUVs
- No value if you’re not on the Greenworks 24V platform
- Scissor-type: not suited for sustained suspension or brake work
| Spec | Value |
|---|---|
| Capacity | 3 ton max |
| Lift Height | 6-1/8″ to 17-1/2″ |
| Power | Greenworks 24V PowerAll battery |
| Type | Cordless scissor jack |
| Safety | Self-locking, overload protection |
Bottom line: The right pick for Greenworks battery platform users. Skip it if you’re on a different tool system.
STANDTALL 5 Ton 12V Electric Kit — Best Complete Kit
Price: $128.60 | Buy Now on Amazon
This 12V floor jack kit is the most complete roadside package: electric jack, impact wrench, and tire inflator in one carry case. The 12V power draws from your car battery via direct clamps, so there’s no separate battery to keep charged. Dual motors drive the 5-ton hydraulic lift up from a 5.9″ minimum height, with a self-locking structure that holds position under load. Press a button to raise, press to lower.
The inflator is the practical differentiator. A flat tire on the side of the road means you need the jack to swap the spare, lug nut removal to pull the wheel, and a way to fill the spare. This kit covers all three. The carry case keeps it organized in the trunk rather than rattling loose in a bag. The impact wrench is basic automotive-grade, not a professional tool, but it handles lug nuts without issue.
Pros
- Jack plus impact wrench plus inflator in one case
- 12V from car battery — no separate battery to keep charged
- 5-ton capacity handles trucks and full-size SUVs
- Self-locking structure, steel body
Cons
- Requires car running or direct battery connection during use
- Scissor-type, not for sustained garage work
- Impact wrench is roadside-grade, not a shop-quality tool
| Spec | Value |
|---|---|
| Capacity | 5 ton (10,000 lbs) |
| Minimum Lift Height | 5.9″ |
| Power | 12V DC (car battery) |
| Includes | Electric jack, impact wrench, tire inflator, safety hammer, carry case |
| Type | 12V scissor jack kit |
Bottom line: The complete roadside kit. If you want one case that handles a flat tire from start to finish, this is it.
ROADTEK 3 Ton Standard Electric Floor Jack — Best for Low-Profile Cars
Price: $489.99 | Buy Now on Amazon
The standard ROADTEK steel model has a 3-3/8″ minimum saddle height, slightly lower than the aluminum model’s 3-3/4″, and a taller maximum lift of 24-1/4″. The lower entry point matters for lowered cars, vehicles with aftermarket front lips, or sport-trim bumpers that limit ground clearance at standard entry angles. The 24-1/4″ max lift gives full suspension travel range for coilover work or brake caliper clearance during service.
Like the aluminum model, it runs on a built-in 20V lithium battery and uses a gradual release valve for controlled descent. The all-steel body is heavier but rated for the same 3-ton capacity. The $90 premium over the aluminum model buys you the lower entry point and 4.25 additional inches of max lift. If your car sits at stock height, the aluminum model is a better value.
Pros
- 3-3/8″ minimum saddle — fits under lowered vehicles
- 24-1/4″ max lift, covers full suspension travel for coilover work
- Built-in 20V battery, fully cordless
- Gradual descent valve, controlled lowering
Cons
- $490 — the most expensive pick in this guide
- Heavier than the aluminum model due to all-steel construction
- The $90 premium over the aluminum version is only justified for lowered vehicles or long-travel suspension work
| Spec | Value |
|---|---|
| Capacity | 3 ton (6,000 lbs) |
| Lift Height | 3-3/8″ to 24-1/4″ |
| Power | Built-in 20V lithium battery |
| Construction | Steel |
| Type | Electric trolley floor jack |
Bottom line: The right choice for lowered cars and anyone who needs maximum lift height for suspension work. Otherwise, save $90 and buy the aluminum model.
How to Choose an Electric Floor Jack
Trolley Floor Jack vs. Scissor-Type Cordless Jack
This is the most important distinction in this category. A trolley-style electric floor jack (ROADTEK) rolls under the car at a low angle, makes contact with the jack point or subframe, and lifts from there. This geometry is stable under side loads, which is why mechanics use them for brake and suspension work where the wheel assembly is off and the car is hanging on the jack. A scissor-type cordless jack (STANDTALL, Greenworks) works best for straight vertical lifts at a pinch weld or factory jack point. That’s fine for tire changes but not the right setup for sustained work with wheels off. Our guide to jack types covers this trade-off in detail, including where bottle jacks and scissor jacks belong in a well-equipped garage.
Capacity for SUVs, Trucks, and Lifted Vehicles
Three-ton capacity (6,000 lbs) handles most passenger cars, minivans, and smaller crossovers. Full-size pickups, 3/4-ton trucks, and heavy SUVs often weigh more — a full-size F-250 at curb weight runs close to 7,000 lbs, so the weight on any single jack point is roughly 1,750 lbs, well within a 3-ton rating. The 5-ton scissor units in this guide (STANDTALL) are rated for vehicles up to 10,000 lbs, which covers most lifted trucks. For a detailed breakdown of what size jack fits your vehicle, see our floor jack sizing guide.
For lifted trucks, minimum saddle height matters as much as capacity. A lifted truck clears the ground by more than a stock vehicle, so the saddle height isn’t the constraint — max lift height is. The ROADTEK standard model at 24-1/4″ max lift has more range than the aluminum model’s 20″ max, which matters for lifted suspensions where the jack travel needs to reach the jack point even with suspension droop.
Power Source
Built-in 20V battery (ROADTEK): fully cordless, no compatibility questions. Platform-compatible (Greenworks 24V): makes sense if you already own those batteries. 18V/20V MAX compatible (STANDTALL cordless): ships with its own battery but accepts 20V MAX batteries — verify your specific brand before counting on cross-compatibility. 12V corded (STANDTALL 12V kit): draws from the car battery, reliable power but requires a running car or direct battery connection. For garage use where you have time, any of these works. For roadside emergencies, the 12V corded model or any unit with a freshly charged battery are both solid options.
Minimum Saddle Height
This is the specification most buyers skip until they try to slide the jack under their car and it won’t fit. Stock-height vehicles are generally fine with 3-3/4″ entry points. Lowered cars, track builds, and vehicles with aftermarket front bumpers may need 3-3/8″ or lower. Measure your lowest clearance point at the jack position before buying. Using ramps to create clearance for a standard-profile jack on a lowered car is a real workaround but adds setup time to every job.
How We Tested
Products in this guide were selected based on verified Amazon availability (confirmed via the Amazon Creators API, June 2026), full manufacturer specification review, and user review patterns from verified purchasers. Floor jacks require hands-on workshop time to fully evaluate durability and descent behavior, so the picks here reflect what we can confirm from specifications and review data rather than direct physical testing. Specs listed come directly from manufacturer product listings. For a broader look at manual floor jack options, see our full hydraulic floor jack roundup, which covers traditional pump-handle models side by side.
Frequently Asked Questions
Can I use an electric floor jack on a lifted truck or SUV?
Yes, with the right model. Lifted trucks have more ground clearance, so minimum saddle height usually isn’t the constraint — maximum lift height is. You need enough travel to reach the jack point after the suspension droops with the wheel off the ground. The ROADTEK standard model (24-1/4″ max lift) covers most lifted applications better than the aluminum model’s 20″ max. For capacity, a 3-ton jack handles most full-size truck weights; the 5-ton STANDTALL units cover heavier vehicles.
What is the difference between a 12V and a battery-powered cordless floor jack?
A 12V floor jack plugs into your car’s 12V socket or directly to the car battery. It draws power from the car, so the battery never dies on you, but you need the car accessible. A battery-powered cordless jack (18V, 20V, 24V) has its own rechargeable lithium battery built in. Cordless models are faster to deploy and don’t require the hood open, but you need to keep the battery charged ahead of time.
Is a 3-ton electric floor jack enough for a full-size pickup?
Usually yes. A 3-ton jack has a 6,000-lb capacity. Most full-size pickups weigh 5,000-7,000 lbs at curb weight. The load on a single jack point is roughly one quarter of that, which falls well within the 6,000-lb limit. For very heavy trucks, 3/4-ton and 1-ton work trucks, or towing-configured vehicles, check the actual curb weight against the jack rating. Our floor jack sizing guide covers this calculation by vehicle type.
Do electric floor jacks need jack stands?
Yes, always. An electric jack lifts the car the same way a manual jack does — once the car is at height, set rated jack stands before going under the vehicle. A jack is a lifting device, not a support device. This applies without exception to electric, hydraulic, and scissor jacks alike.
How long does the battery last on a cordless electric floor jack?
It varies by model and load. For typical garage use with a few lifts and lowers per session, most built-in battery models handle multiple vehicle changes on a single charge. Manufacturers of the models in this guide don’t publish specific cycle counts — check the listing for any stated runtime specs. For roadside use, keep the battery topped off regularly so it’s ready when needed.
Power Tool Insider is reader-supported. When you buy through links on our site, we may earn an affiliate commission at no extra cost to you. This doesn’t affect our recommendations — we only recommend tools we’d actually use. Full disclosure.